Skip to main content

Build Update: Canopy Finished October 5th 2019

Please excuse the poor video editing and the watermark, I'm looking for some better software to edit more videos like this. Please let me know if you have any suggestions.

Also when I recorded I thought the existing videos were portrait so that's why it's mixed up, hopefully it's not too distracting.

I'd like to give a big thank you to everyone who has helped me out with my project

Mr John
Paul Shadwick
Stan Whitfield
Ron Sipple
Ralph and Joyce Shultz
Paul and Beth Duff
Mario Gonzalez
Paul Hockin
Kevin White
Nicholette Shultz
Gordon Fern
Anon Anon
Jeannette Shultz
Mike David
Jonathan and Julia Wolfe
Jon Palmstrom
Laurie Burns
Donna Mickel
Dana Baker
Mrs Nadine
Eric Johnson
Tammy Reap Hayes
Jeff Shultz
Brandon Lenart
WP Marsh
Michael Couillard
Mr Anonymous
Joe And Judy Green
Mrs Brenda
Mickey Gonzalez
Mrs Cathy
Paul and Vickie Laberge
Judy and Roger Kemmerle
Fico Gonzelaz


Popular posts from this blog

Build Update April 5 2018: Dissasembling the Aerovee

The engine I bought was already built, and had not been run. My dad and I planned to take it all apart to give me a better understanding of the engine, as well as to identify any problems before they got bad. The Arovee engine was heavy and awkward to move. at the time it was sitting on the workbench with everything installed. Going into this I had only enough sense to tell you which cylinder is the #1, 2, 3, and 4, and I knew some of the terminology, such as crackshaft. I frequently asked my dad "what do you call that part?"  we began unbolting stuff in roughly reverse order from the manual (if you're familiar with sonex plans, you're used to backwards) In under an hour we had stripped many of the external parts off and the engine had lost at least 20 pounds! A box was designated as the hardware box, so it'll be like legos trying to find the right bolts and nuts again when I reassemble it. the important part is that they're all together and no...

Build Update August 7th 2018: Brakes, and Glareshield

Today I got a ton of work done on my hydraulic brakes system. I assembled the mount for my master cylinder and through some testing and pretending to sit in the cockpit to get a feel for where I want my brake lever, I located the exact position. I drilled and clecoed the whole assembly. with it in place, the real work behind hydraulic brakes set in. I cut my 12' length of tubing into two pieces, one for each brake. In order for the brake lines to get from the master cylinder inside the plane, to the brakes on the wheels, I had to drill a couple holes in the firewall at the front of the plane. One of the worst things that can go wrong with these brakes is having a line break. If that happened I would loose all pressure and have no brakes. If the brake line touches something, it will likely vibrate against it in flight, if it does that, eventually it will break. To prevent my lines from breaking and loosing their fluid, I use a larger size tubing, that just bar...

Plane Painted

When I flew my plane to OSH23, I saw an artist painting a small depiction of an airplane. She was painting a very small photorealistic scene from a phone image. I could not believe how detailed she was able to make it! She let me watch over he shoulder as she worked. I was so impressed that I commisisoned a similar painting of my sonex. Id like to share that painting with you all. Her name is Rhonda DeGarmo. She has a lot of other work. If you're interested in getting in touch with her please reach out to me and I will pass along her information.